Shopping Cart

Technical Specs

CONSTRUCTION

  • HIGH DENSITY POLYETHYLENE (HDPE)
  • STAINLESS STEEL HARDWARE
  • CAST ALUMINUM HANDLES
  • GALVANIZED STEEL SUBFRAME

WEIGHT CAPACITIES

EVENLY DISTRIBUTED PAYLOAD
2000 LB
DRAWER CAPACITY (EACH)
200 LB

SYSTEM DIMENSIONS

 
SHORT BED
STANDARD BED
LENGTH
64.54”
75.25”
WIDTH (VARIES TO FIT VEHICLE)
63”-71”
63”-71”
HEIGHT
12”
12”
TOTAL WEIGHT (LBS)
~200
~220

SHIPPING DIMENSIONS

DIMENSIONS
66"x 39" x 21"
77"x 39" x 21"
WEIGHT (LBS)
218 (truck) - 228 (van)
245-250 (T) - 255 (V)

DRAWER DIMENSIONS

LENGTH (TOP OF DRAWER)
61.4”
72.1”
LENGTH (BOTTOM OF DRAWER)
55.4”
66.1”
WIDTH (TOP OF DRAWER)
18”
18”
WIDTH (BOTTOM OF DRAWER)
16.75”
16.75”
HEIGHT
8.5”
8.5”
DRAWER VOLUME (EACH)
5.4 FT3
6 FT3
DRAWER EXTENSION (EACH)
48”
48”

STEEL SUBFRAME

GALVANIZED STEEL TUBES
12 TUBES
14 TUBES

LENGTH IN DETAIL

Overall Length—Short 64.54” [1639.2 mm]; Long 75.25” [1911.35 mm]
Length—Difference in Standard and Short System: 10.714” [272.14mm]
Length—Tailgate Ammo Can Center to System Center: 26.5” [673.1 mm]
Length—Cabside Ammo Can Center to Tailgate Ammo Can Center: Short 49.286” Standard 60”

WIDTH IN DETAIL

Overall Width—71” [1803.4 mm]
Width—Lateral Steel Tubes minus End Caps: 61.54” [1563.11 mm]
Width—Underside – Widest Lateral Steel Tube Plastic Supports: 63.15” [1603.91 mm]
Width—Base of Ammo Cans at Widest Point: 58.00” [1473.2 mm]
Width—C channel Mtg to C channel Lateral Mounting Distance: 46.04” [1169.25 mm]
Width—Minimum Overall that Clears Ammo Can Openings: 63.04” [1601.2 mm]
Width—Drawer Centerline to Center of Vert: 11.5” [292.1 mm]

HEIGHT IN DETAIL

Overall Height: 12”; plus .19” to Top of D Tread on Deck for a total of 12.19” [309.6 mm]
Height—Base to Underside of Lowest Top Surface of Deck (aka. to clear wheelhouse): 11.75” [298.45 mm]
Height—Base to Underside of Lateral Steel Tube Plastic Supports: 10.5” [266.7 mm]
Height—Base to Underside of Lateral Steel Tube: 10.75” [273.05 mm]
Height—Base to Ammo Can Top Mounting Surface: 10.5” [266.7 mm]